RepRap Champion Metal J-Head V6 Hot End for RepRap 3D Printer 1.75mm Filament Bowden Extruder 0.4mm Nozzle Kossel Mini Prusa i3

October 14, 2017 - Comment

Hotend is equipped with NTC3950 thermistor and 12V 40W heater This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone – capable of printing high temperature melting point plastics such as nylon and polycarbonate. NTC 3950 Thermistor parameters: • NTC3950 thermistor temperature table now incuded in Marlin

Hotend is equipped with NTC3950 thermistor and 12V 40W heater

This hotend is a replica of newest, popular V6 hotend. All metal design, no PTFE in hot zone – capable of printing high temperature melting point plastics such as nylon and polycarbonate.

NTC 3950 Thermistor parameters:

• NTC3950 thermistor temperature table now incuded in Marlin firmware
• Small Size: 1.25mmx2.0mm glass bead
• High accuracy: 1%
• Resistance value at 25°C=100K
• Wiring insulation: high temperature teflon/PTFE
• Wiring length: 1 meter

Package contents:

1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end

Product Features

  • RepRap 3D printer extruder hotend compatible with V6 1.75mm / 0.4mm
  • Properly machied, All metal heatbreak. Good for all printing material.
  • 12V 40W heater, 12V 013A high speed fan with shroud, NTC 3950 pre-wired thermistor
  • Includes 1 meter long 4mm OD 2mm ID bowden line PTFE tubing

Comments

Comments are disabled for this post.