M3 Stud Thermistor + cable for Reprap 3D Printer Extruder V5 or V6 Hotend Prusa i3

May 6, 2017 - Comment

Easy to install Hex M3 Stud Thermistor features: M3 stud threaded length is 3mm. This will allow to use shallower M3 threaded holes. Hex Body length: 6mm Length of leads: 55mm Package Contents 1 x Hex Thermistor based on NTC EPCOS B57560G1104F 100k Thermistor. 1 x JST Male connector with crimp-on pins. 1 x 1

Easy to install Hex M3 Stud Thermistor features:

M3 stud threaded length is 3mm. This will allow to use shallower M3 threaded holes.
Hex Body length: 6mm
Length of leads: 55mm

Package Contents

1 x Hex Thermistor based on NTC EPCOS B57560G1104F 100k Thermistor.
1 x JST Male connector with crimp-on pins.
1 x 1 meter long cable with JST connector on one side and dupont connectors (like for RAMPS) on other side.

Product Features

  • Based on EPCOS 100K Thermistor B57560G1104F.
  • Working temperature limit of 280C due to high temp. industrial epoxy resin used.
  • Connector type: JST 2 pin connector, 2.5mm spacing.
  • 1 meter long connection cable supplied

Comments

Write a comment

*