ANYCUBIC Ultrabase 3D Printer Platform Tempered Glass Plate Durable Build Surface for Large Print Size 310x310mm

February 5, 2018 - Comment

What printing experience was brought by Ultrabase? Watch the video to find What has been bougth to us by Ultrabase. Fly to:https://www.youtube.com/watch?v=639Qwo2wNjg&feature=youtu.be How to assemble the Ultrabase platform: Just peel off the blue tape on the backside, and then fit the Ultrabase to the hotbed (base). Please visit our official website: www.anycubic3d.com or Youtube channel

What printing experience was brought by Ultrabase?
Watch the video to find What has been bougth to us by Ultrabase.
Fly to:https://www.youtube.com/watch?v=639Qwo2wNjg&feature=youtu.be

How to assemble the Ultrabase platform:
Just peel off the blue tape on the backside, and then fit the Ultrabase to the hotbed (base).
Please visit our official website: www.anycubic3d.com
or Youtube channel :www.youtube.com/watch?v=zDup0gp9pLA for assembly video

Attention:
* Suggested bed temperature may vary depends on the filament material;
* Please properly level the bed before printing;
* Never let the nozzle rub against the Ultrabase directly;
* Clean the platform surface with alcohol/water.

Temperature settings for different filaments:
1. PLA:50-70℃
2. Flexible filament: 50-70℃
3. ABS:100-125℃ ( 110℃ is recommended )
4. PC:100-130℃ ( 120℃ is recommended )
5. Nelon:90-120℃ ( 110℃ is recommended )
6. PP:100-130℃ ( 120℃ is recommended )
7. PETG: 50-70℃

Ultrabase Specification:
Material : Special Glass + microporous coatings
Item size : 310*310*6mm
N.W :600g
G.W :720g
Package List:
1x ANYCUBIC 310*310Ultrabase 3D Printer Platform

Product Features

  • Excellent adhesion: Ultrabase covered by microporous coating, shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scrapper for very large models.
  • Good Flatness: Ultrabase is glass-based and the critical tolerance is ±0.2mm. (normally within the 0.1mm range).
  • Durable: The special coating is inorganic and has a hardness of 8 Mohs, and it is capable to work at 400℃.
  • Easy to clean: Ultrabase is easy to clean by alcohol/water.
  • Compatibility: Anycubic 310*310Ultrabase compatible with large size printer like for CR-10,Upgrade your printer with Ultrabase! You can get full support from ANYCUBIC Team.

Comments

Comments are disabled for this post.