Anycubic PTFT Lined MK8 Extruder Hotend with Thermistor and M6x30mm Throat Nozzle for Reprap Prusa 3D Printer

May 22, 2017 - Comment

Specification: Throat nozzle size: M6x30mm; Nozzle diameter:0.4mm Filament compatibility:1.75mm ABS/PLA/Flexible/Others Thermisitor: – For 3D printers: use TEMP_SENSOR 11 in Marlin firmware – High accuracy: 1% – Resistance value at 25°C=100K – Wiring insulation: high temperature teflon/PTFE – Wiring length: 1 meter Cartridge heater:12V,40W; Cable Length:1 meter; Package List: 1*MK8 extruder hotend kits Product Features Chamfer

Specification:
Throat nozzle size: M6x30mm;
Nozzle diameter:0.4mm
Filament compatibility:1.75mm ABS/PLA/Flexible/Others
Thermisitor:
– For 3D printers: use TEMP_SENSOR 11 in Marlin firmware
– High accuracy: 1%
– Resistance value at 25°C=100K
– Wiring insulation: high temperature teflon/PTFE
– Wiring length: 1 meter
Cartridge heater:12V,40W; Cable Length:1 meter;
Package List:
1*MK8 extruder hotend kits

Product Features

  • Chamfer design on throat nozzle ,much easier for filament feeding
  • M6x30mm stainless steel throat nozzle+ PTFE liner+ heater block +print nozzle +thermistor + cartridge heater for makerbot2 part
  • Easy to be installed and a good replacement for mk8 extruder
  • Sandblasting surface on heating block
  • Cartridge heater:12V,40W

Comments

Comments are disabled for this post.