Anycubic MK8 Extruder Hotend 0.4mm Nozzle Print Head 1.75mm Filament for 3D Printer

June 30, 2017 - Comment

NOTE: Make sure the maximum temperature is less than 280° Specification: The extrusion nozzle: Default :0.4mm The material of Print: 1.75mm PLA/ABS The flow rate of Nozzle: about 24cc / h Sports shaft speed:40mm/s The voltage of heating nozzle: 12V Thermistor: 100K NTC Cartridge heater: 12V,40W The operating voltage of cooling fan: 12V Net weight:

Buy Now! $37.85

NOTE:

Make sure the maximum temperature is less than 280°

Specification:

The extrusion nozzle: Default :0.4mm

The material of Print: 1.75mm PLA/ABS

The flow rate of Nozzle: about 24cc / h

Sports shaft speed:40mm/s

The voltage of heating nozzle: 12V

Thermistor: 100K NTC

Cartridge heater: 12V,40W

The operating voltage of cooling fan: 12V

Net weight: 450g

Normal working temperature: 190°-230°

Package List:

1×MK8 extruder

Product Features

  • Nema 17 high quality stepper motor with larger torque and less heat buildup
  • Special ceramic insulation cotton ensures the stability of heating; electricity-saving
  • The extrusion nozzle:Default 0.4mm ;
  • Filament:1.75mm PLA/ABS/Flexible/other
  • Default drive gear:26 Teeth

Comments

Comments are disabled for this post.

  • Categories